PRODUCT -> SPECIAL MACHINES -> TOTAL PROCESS


    a
b

 

Technical Specifications
Configuration
Equipment
Applications

1
Technical Specifications

This type of special machines are configured starting on a TA36, TA-42 or TA-60 automatic lathe specifically equipped for the execution of  basic machining operations. Later and after an analysis of requirements, the machine is equipped with special machining, verification, processing, cleaning, etc. systems, depending on the necessary auxiliary processes to do in order to complete the 100% of the workpiece.

The objective of this type of machines is to complete the process of manufacture of piece in a single machine, with a very high production capacity and obtaining a constant good quality. The diameter range of workpieces comes from the capacity of the bases standard machine.

 

 

1
Configuration

The machine is configured depending on the manufacture processes required by the piece. Initially, the machining processes of an automatic lathe are configured, designing the rest of the processing in a parallel development configuration. This configuration allows to do different sequence operations to several pieces in parallel, saving time.


c

1
Equipment

As examples of additional operations emphasize:

  • Cutting
  • Positioning
  • Internal – external  beveling
  • Facing
  • Internal – external threading
  • Small holes from 0,4mm
  • Interior cleaning
  • Longitudinal measurement
  • Arrow Measurement
  • Positioning to transporting tape (and selection)

1   2   3

1
Applications

The application of this type of machines is fundamentally great series of pieces that present a process of machining, fundamentally of turning, and demands short times of process and high quality.

As application examples emphasize:


  • Special machines for tube of quality up to 60mm diameter and 600mm length
  • Special machines for  valve pieces
  • Special machines for automotion pieces starting from tube
© Unamuno, S.A. 2004  Aviso Legal