Cam shaft production rate with variator (parts/min.)
40 a 1.800
Maximum component length when drilling (mm)
140
Maximum component length (mm)
250
Number of working tools
6
Maximum Tapping Size & External Thread Size
M-14
Maximum Thread Milling Size
M-16
Maximum drilling Size
Ø18
Maximum turning length (mm)
70
Maximum drilling length (mm)
70
Configuration
Equipment
Longitudinal Knurling Tool: the knurling tool is mounted on the drilling slide. The knurls can be adjusted onto the corresponding diameter. It is also possible to drill simultaneously with this device.Imagen
Thread Milling Tool: this accessory cuts exterior threads very fast in lighter materials like brass and aluminum with thread pitches up to 2mm. Imagen
Turning Tool: this tool is used for the finish turning of shafts (maximum 35mm), countersinking and chamfering. Like the other spindle tools it is fixed to the drilling spindle. Four inter-changeable turning cutter holders are supplied: Nº202/0=0º. Nº202/15/15=15º. Nº101/30=30º. Nº202/45=45ºThis tool can also drill simultaneously.Imagen
Turning and Drilling Tool: this tool is mounted in the drilling slide and is designed for turning and drilling long and delicate components.Imagen
Roller Box Turning Tool: it has the advantage of supporting the component with rollers while turning it or centre drilling, which helps ensure greater parallelism. .Imagen
Copy Tool: this tool is designed for machining longer profile or conical forms. Imagen
High Speed Drill: for drilling very small holes (less than 2-3mm). It is mounted in the standard drilling slide and has a 2,800 rpm, 0,25kw motor driving the drilling spindle by using counter rotation to the main spindle. In this way very high surface speeds can be obtained for drilling small holes. Maximum collet diameter 6.5mm. Imagen
Twin Drilling Tool: it is mounted on the longitudinal slide, and is used when it is necessary to machine two holes in a component. Maximum drill diameter 10mm, máximum drilling depth 20mm.Imagen
Lateral Turning Tool: this tool is designed for machining components with tapers or wide exterior grooves. Imagen
Circular form tool: this tool is designed for O/D machining of profile forms. Imagen
Internal Grooving Tool: this tool is designed for making internal grooves and undercuts for internal threads. Imagen
Device of inside channels: for any type of channel, thread bottoms, etc., in inside diameters. Imagen
Optional 4th Lateral Turning Tool: This accessory substantially increases the machining possibilities, especially when turning long workpieces at a distance from the headstock collet. Imagen
Combined Drilling and Internal/External Threading Tool: It has a capacity of up to M-14 in non ferrous materials and M-10 in steel.Imagen
Applications
This lathe has been designed for the manufacture of small components on long production runs with good machining tolerances.
